• Home
  • Articles
  • A guide to honour shields and delegation gifts: material, design and timing

A guide to honour shields and delegation gifts: material, design and timing

How to choose a shield worthy of the honouree and your entity: materials, honour tiers, engraving, presentation boxes and when the list must be final.

Choosing an honour shield starts with the honouree's tier, not with a materials catalogue: a unique piece for the guest of honour, a distinguished shield for sponsors and partners, and a uniform shield for participants. Quantity and date then decide the right material, and the names list is fixed early because it sets the engraving date. This is what our pieces, presented on the most senior occasions, have taught us.

Why does a shield deserve this much planning?

The shield is what stays in the honouree's office after the event, and what appears in the photo the entity publishes on its accounts and in its reports. It carries two messages at once: appreciation of the person, and the image of the entity that presented it. A poorly made shield, or one engraved with an error, shows up in the very photo that was meant to honour its owner.

Because Kunoze Production makes shields, trophies, models and gifts in its own factories inside the Kingdom and abroad, we see the decision from both sides: what the organiser wants in the photo, and what the factory needs in time and information to deliver it without errors. The Kunoze Production items page lists what we make in detail.

How many honour tiers do you need?

The same piece is not given to everyone, because equal treatment here reads as a slight to the guest of honour. We usually suggest three tiers:

  • Guest of honour: a unique piece, a trophy or special model, in a presentation box designed for it.
  • Sponsors and partners: a distinguished shield, larger and in a finer material than the participants' shield.
  • Participants: a uniform shield in the event's identity, produced in one batch at consistent quality.

Size, material and box differ between tiers, while the visual identity stays the same across all three, so the pieces look like one family in the group photo. The table sums up the differences:

TierPieceTypical materialPackaging
Guest of honourTrophy or special modelMetal, or a heritage model on a wooden baseA presentation box designed for the piece
Sponsors and partnersDistinguished shieldWood with a raised metal logoA box in the event's identity
ParticipantsUniform shieldWood with print and engravingA standard box, arranged by name

Which material suits each piece?

  • Wood: warm and formal, suited to shields, bases and presentation boxes, and it takes engraving and inlay well.
  • Metal: for trophies, raised logos and fine engraving of names and dates.
  • Leather: for personal gifts, document holders and MoU folders.
  • Foam and models: for architectural and heritage models such as the Holy Kaaba, the falcon, the dhow and heritage doors.

A single piece often combines two materials: a wooden base with a metal logo, or a model on a leather base. The rule is that the material serves the piece's message; it is not chosen because it is the most expensive.

How do quantity and date affect the choice of material?

We make anything from one distinguished piece to hundreds of uniform ones, but quantity changes the calculation. A unique piece needs longer in design and prototyping, because it is made once and cannot carry a mistake. Uniform shields are produced in one batch, and the challenge becomes consistent quality from the first piece to the last, and accurate engraving of every name.

If the date is close, it is better to choose a material and design that allow faster production without compromising the look, rather than holding on to a complex design that finishes late. We discuss this with you when we prepare the proposal, set the delivery date in it, and keep to it.

What goes on the shield?

As little as possible, in the clearest script possible: the entity's logo and the event's logo in their correct places, the honouree's name in a legible script, the event date, and one sentence at most. A shield crowded with text cannot be read in a photo, and a long sentence shrinks until it disappears.

Check names and titles with the entity's protocol department before approving the engraving, because a wrong title or an unusual name order is a mistake that cannot be fixed after engraving. If the event is bilingual, decide early whether names are engraved in Arabic only or in both languages.

How does a piece move from design to delivery?

  1. A 3D design in the entity's identity, sent for approval.
  2. A prototype for unique pieces and a sample shield for the uniform tier, before full production.
  3. Wood, leather and metal fabrication in our factories.
  4. Print and engraving once the final names list is approved.
  5. Packing in presentation boxes, arranged in stage order.
  6. On-time delivery to the event venue with a matching list.

When must the honourees list be final?

The final honourees list is what most often runs late at any event, and it sets the engraving date. Fix the list well before the event, and agree its closing date in writing with every party that adds names.

Keep two extra unnamed shields for any last-minute addition, with a neat name plate that can be fixed to them if needed. This small precaution saves the honours segment from its most embarrassing moment: a guest whose name is called and no shield bearing it.

Which mistakes keep recurring in shield orders?

  • Approving the design from an on-screen image without a prototype, then discovering the real size on delivery day.
  • A low-resolution logo that cannot be engraved, so the original file is requested in the final week.
  • A late names list that squeezes the time for engraving and checking.
  • Forgetting the presentation boxes, or ordering them separately from another supplier in a size that does not fit the piece.

Each of these is solved by one step at the start: a prototype, an original logo file, a closing date for the list, and a box designed with the piece itself in the same factory.

How do you choose delegation gifts with the host region's identity?

A delegation gift carries the place with it. Kunoze Production makes Holy Mosque models and Kaaba-door plaques, which are fitting gifts for state guests. In other regions, identity comes from local products: Taif roses, jasmine and coffee in Jazan, olives in Al-Jouf, and Qassim dates in packaging we make. Delegation gifts by region collects these ideas for every region of the Kingdom.

How are shields handed over on the day?

At the Najran Investment Forum 2025, the honours segment with shields and awards by Kunoze Production was part of the same scope, so the pieces arrived arranged to match the list. This is how we work: shields set out on a table behind the stage in calling order, bearers who know their sequence, and the photographer in position before the first name. Honours segment examples show how that moment is run, and protocol basics explains where it sits in the event script.

Why does the presentation box matter?

The presentation box is part of the gift: it protects the piece in transit and travel, raises its value at hand-over, and makes it ready to display in an office. Gifts are delivered in their boxes, arranged by delegation names, so nobody searches for a box at the last minute.

What is the checklist before ordering shields?

  • The number of honourees in each of the three tiers.
  • The entity's and the event's logos in a print- and engraving-ready format.
  • The single sentence to appear on the shield.
  • The closing date for the names list, and titles checked with protocol.
  • The delivery address and date, and who receives the pieces on site.
Kunoze Production serves entities directly, with or without an event. Send us your honours list or book a free consultation, and we will suggest the tiers, materials and timing.
Kunoze Consulting · free

Apply this to your event

A free 30-minute consultation with the Kunoze team.

  • Goal
  • Audience
  • City and venue
  • Timeline

Your next event deserves a legacy

Send us the idea or the date, and the Kunoze team replies during working hours.

WhatsApp QRScan to chat on WhatsApp
Chat on WhatsApp

A free consultation for your event, wherever it is. Leave your name and number and a project manager calls during working hours, or book a time now.

Or book a specific time